Project

General

Profile

  1. Connecting via Ubuntu

The following has been tested using Ubuntu 16.04. It uses the open connect VPN software, 7.0.8+

  1. Add the OpenConnect’s main ppa

<!-- -->

sudo add-apt-repository ppa:lenski/openconnect-gp
sudo apt-get update
  1. Install the openconnect client

    $ sudo apt-get update
    $ sudo apt-get install openconnect

  2. Connect

Use the command: sudo openconnect —juniper https://vpn.sesync.org/Staff

$ sudo openconnect --juniper https://vpn.sesync.org/Staff 
[sudo] password for toaster:YOURLOCALPASSWORD 
WARNING: Juniper Network Connect support is experimental.
It will probably be superseded by Junos Pulse support.
GET https://vpn.sesync.org/Staff
Connected to 129.2.30.70:443
SSL negotiation with vpn.sesync.org
Server certificate verify failed: signer not found

Certificate from VPN server "vpn.sesync.org" failed verification.
Reason: signer not found
Enter 'yes' to accept, 'no' to abort; anything else to view: yes
Connected to HTTPS on vpn.sesync.org
Got HTTP response: HTTP/1.1 302 Found
GET https://vpn.sesync.org/dana-na/auth/url_0/welcome.cgi
SSL negotiation with vpn.sesync.org
Server certificate verify failed: signer not found
Connected to HTTPS on vpn.sesync.org
frmLogin
username:SESYNC_USERNAME
password:
...
Server certificate verify failed: signer not found
Connected to HTTPS on vpn.sesync.org
Connected as 192.168.197.135, using SSL
ESP session established with server